Fisher & Paykel Drive Belt / Pulley Noise

Washer-dryer combo produces a high-pitched squealing or screeching noise when spinning or tumbling.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or glazed Fisher & Paykel drive belt, Misaligned or damaged motor pulley, Foreign object between drum and tub, Worn drum support bearings

How to Fix / Troubleshooting

Safety first: Unplug the appliance before removing any panels.

  • Check for foreign objects: Spin the drum by hand. If you hear scraping, there may be a foreign object between the inner drum and outer tub. Inspect the drum holes with a flashlight.
  • Inspect belt and pulleys: Remove the rear panel. Check the drive belt for cracks, glazing, or fraying. Inspect the motor and drum pulleys for damage or misalignment.
  • Replace belt: If the belt is worn, slip it off the pulleys and install a new Fisher & Paykel drive belt, ensuring correct routing and tension.
  • Check bearings: If the squeal is accompanied by roughness when spinning the drum by hand, the tub bearings may be failing and require professional replacement.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Fisher & Paykel Drive Belt
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements