Fisher & Paykel
Power Supply / Main Board Failure
Washer-dryer combo will not power on; display is completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on Fisher & Paykel main board, Faulty power cord, Tripped household breaker, Failed main control board power supply section
How to Fix / Troubleshooting
Safety first: Turn off the circuit breaker and unplug the appliance before opening any panels.
- Check outlet: Plug another device into the same outlet to confirm power is present. Reset any tripped breakers or GFCI outlets.
- Inspect power cord: Check the cord for cuts, burns, or kinks. Replace if damaged.
- Access main board: Remove the top cover and locate the Fisher & Paykel main control board. Check for an onboard fuse and test it for continuity. Replace only with the same rating.
- Board inspection: Look for burnt components or bulging capacitors. If present, replace the entire control board.
- Professional service: If you are not experienced with mains voltage electronics, contact a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Fisher & Paykel Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements