Washer-dryer combo reports motor current too high; may stop during spin with E55.

Safety first: Unplug the unit before inspecting moving parts.

• Reduce load: Remove some items and try a smaller load to see if the error clears.
• Check drum rotation: Spin the drum by hand. It should rotate smoothly and coast. Grinding, scraping, or stiffness suggests bearing or seal issues.
• Inspect belt and pulley: Remove the rear panel and check that the drive belt is properly seated and not overly tight or frayed. Ensure the motor and drum pulleys turn freely.
• Test motor: Use a multimeter to check motor winding resistance. A shorted motor will draw excessive current and must be replaced.
• Address mechanical binding: If bearings are seized or the tub is difficult to turn, further disassembly and bearing/tub replacement may be required by a professional.