Washer-dryer leaks water from the rear or underneath during drain or spin.

Safety first: Unplug the appliance and close water taps. Expect water spillage when disconnecting hoses.

• 1. Inspect external drain hose: Check the rear hose for cracks, splits, or loose connections at both the machine and standpipe/sink.
• 2. Access internal hoses: Remove the rear or bottom panel to view the tub-to-pump and pump-to-drain hoses. Look for water trails and damp areas.
• 3. Tighten or replace clamps: If a hose connection is damp, tighten the clamp or replace with a new worm-drive clamp.
• 4. Replace damaged hoses or pump: Any hose with visible damage or a pump with a cracked housing should be replaced.
• 5. Test under operation: Run a rinse/spin cycle while observing for leaks.