Washer-dryer combo shows E08 and may not tumble or spin; motor may hum briefly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Overloaded drum, Stiff drum bearings, Shorted motor windings, Faulty motor control board current sensing

Safety first: Unplug the appliance before internal inspection.

Reduce load: Remove some items and try a smaller load to see if the error clears.
Check drum rotation: Spin the drum by hand. If it feels rough or very stiff, the rear tub bearing may be failing and causing high motor current.
Inspect motor: Check for burnt smell or discoloration on the GE drive motor. Test windings with a multimeter.
Motor control: If motor and bearings are good, the motor control board may be misreading current and should be replaced.

Professional Required 5/5

GE Drive Motor

Check Price on Amazon

We may earn a commission from links on this page.