GE Worn Belt or Support Rollers / Idler Pulley Noise

Washer-dryer combo makes a high-pitched squealing or screeching noise when tumbling or spinning.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Glazed or worn drive belt, Dry or failing idler pulley, Worn drum support rollers (if used), Foreign object rubbing on drum seal

Safety first: Unplug the unit before removing panels.

Isolate noise: Determine if the noise occurs in wash, spin, dry, or all modes.
Inspect belt: Remove the rear panel and check the belt for cracks or glazing. Replace with a new GE drive belt if worn.
Check idler and rollers: Spin the idler pulley and any drum support rollers by hand. If they are noisy or rough, replace them with OEM GE parts.
Check front seal: Inspect the front drum seal/felt for foreign objects or damage and correct as needed.

Medium 3/5

GE Idler Pulley

Check Price on Amazon

We may earn a commission from links on this page.