GE No Spin / Spin Abort

Washer-dryer combo will not spin; clothes come out soaking wet after cycle.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Unbalanced load, Faulty door lock not signaling locked, Failed motor or tach sensor, Clogged drain causing water not to reach safe spin level

Safety first: Unplug the unit before internal checks.

Redistribute load: Open the door, rearrange clothes evenly, and run a spin-only cycle.
Check for standing water: If water remains in the drum, clean the drain pump filter and hose as described for drain errors.
Verify door lock: If the door does not lock before spin, replace the GE door lock assembly.
Motor/tach: If the drum attempts to spin but stops, inspect the motor and tach sensor as described for E42/E43.

Medium 3/5

GE Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.