E31
Gorenje
Condenser / Drying System Error
Washer-dryer displays E31; may be related to drying performance or condenser system.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked condenser unit, Clogged air ducts, Faulty condenser pump (on some models), Dryer temperature sensor error
How to Fix / Troubleshooting
Safety first: Unplug the appliance before cleaning internal components.
- Clean condenser: Remove the condenser (if user-removable) from the lower front compartment. Rinse thoroughly under running water to remove lint and scale. Allow to drain and reinstall.
- Clean filters: Remove lint from the door filter and any secondary filters in the air path.
- Inspect air ducts (advanced): Remove top/rear panels and check for lint build-up in ducts and around the fan. Vacuum carefully.
- Check condenser pump (if fitted): Some Gorenje combos use a small pump to move condensed water. Inspect for blockages and test for operation; replace if not pumping.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Unit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements