Washer-dryer displays E61; wash water does not reach set temperature in time.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partially failing tub heater, Scaled heater reducing efficiency, Incorrect NTC readings, Low supply voltage

Safety first: Unplug the appliance before accessing the heater.

Descale the machine: Run a maintenance cycle with a descaling agent suitable for washing machines to remove limescale from the heater.
Check heater resistance: Measure heater resistance and compare with Gorenje specifications. Replace if out of range.
Verify NTC sensor: Test the wash NTC for correct resistance at room temperature and after warming slightly.

Medium 3/5

Tub Heating Element

Check Price on Amazon

We may earn a commission from links on this page.