Gorenje
No Spin / Spin Inhibition
Washer-dryer fills and washes but will not spin; clothes remain very wet at end of cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Unbalanced load detection preventing spin, Clogged drain system leaving water in tub, Faulty tachometer sensor on motor, Worn motor brushes (if fitted)
How to Fix / Troubleshooting
Safety first: Unplug the appliance before reaching inside the drum or accessing the pump.
- Check for standing water: If water remains in the drum, clean the pump filter and drain hose as described for drain errors.
- Redistribute load: Open the door, separate heavy items, and remove some laundry if the drum is tightly packed. Run a spin-only program.
- Verify spin settings: Ensure the spin speed is not set to 0 or a very low value in the program options.
- Advanced motor check: If the drum never accelerates to spin, inspect the motor, belt, and tachometer sensor as in motor error procedures.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements