Gorenje
Internal Hose / Pump / Tub Leak
Water leaking from the bottom rear or underneath the washer-dryer.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or cracked sump hose between tub and pump, Leaking drain pump seal, Cracked plastic tub, Loose hose clamps on recirculation or dryer condenser hoses
How to Fix / Troubleshooting
Safety first: Unplug the appliance and close water taps. Be prepared for water spillage when opening panels.
- Visual inspection: Pull the machine slightly forward and look underneath with a flashlight to locate the source of dripping.
- Remove rear or side panel (advanced): Identify the sump hose, pump, and other hoses. Check for visible cracks, splits, or loose clamps.
- Tighten or replace: Tighten any loose hose clamps. Replace damaged hoses or a leaking pump with Gorenje-compatible parts.
- Test for leaks: After reassembly, run a fill and drain cycle while observing for further leaks.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements