E16
Gram
Pressure Sensor Signal Error
Washer-dryer shows E16 and fails to detect correct water level; may stop early or not start spin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty water level pressure sensor, Blocked or leaking pressure hose, Loose sensor connector, Control PCB analog input fault
How to Fix / Troubleshooting
Safety first: Unplug the machine before accessing the pressure sensor.
- Step 1 – Inspect pressure hose: Remove the top cover and locate the pressure sensor and its thin hose. Check for kinks, splits, or disconnections. Replace the hose if damaged.
- Step 2 – Clear blockage: Detach the hose from the sensor and gently blow through it toward the tub to clear soap residue. Refit securely.
- Step 3 – Check sensor connection: Ensure the electrical connector is firmly seated and free of corrosion.
- Step 4 – Replace sensor if needed: If E16 persists and hose is sound, replace the pressure sensor with a Gram-compatible part.
Persistent E16 after sensor replacement may indicate a control PCB fault, requiring professional service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Level Pressure Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements