Haier
Internal Hose or Pump Leak
Washer-dryer combo leaks water from underneath or the rear.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose hose clamp on tub-to-pump hose, Cracked drain hose, Leaking pump housing, Split dispenser-to-tub hose
How to Fix / Troubleshooting
Safety first: Unplug the appliance and turn off water supply. Be prepared for water spillage when opening panels.
- Locate leak source: Remove the rear and/or lower front panel. Run a short fill/drain cycle while observing (use caution around live parts; ideally, a technician should do this).
- Check hoses and clamps: Inspect all visible hoses for cracks and all clamps for tightness. Tighten loose clamps with a screwdriver.
- Inspect pump: Look for water seeping from the pump body or shaft. Replace the pump assembly if leaking.
- Replace damaged hoses: Use Haier-compatible hoses and ensure they are routed and clamped as originally installed.
- Dry base pan: Mop up any water in the base to prevent float switch activation.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Tub-to-Pump Hose
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements