Washer-dryer shows E41; door appears closed but machine thinks it is open

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty door interlock switch contacts, Loose door lock connector, Broken door catch not actuating switch, PCB input fault

Safety: Unplug the appliance before accessing the door lock.

Check door catch engagement: Ensure the catch fully enters the lock opening. Replace worn catch if needed.
Test lock contacts: Remove the door lock and test the switch contacts with a multimeter while actuating the lock. Replace if the contacts do not change state.
Inspect wiring: Reseat the connector and check for broken wires.
PCB check: If a new lock does not resolve E41, the PCB input circuit may be faulty and require replacement.

Medium 3/5

Door Interlock Assembly

Check Price on Amazon

We may earn a commission from links on this page.