Hoover Condenser Drainage / Pump Issue

Washer-dryer stops during drying with water collecting in the drum

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked condenser drain path, Failed condenser pump, Kinked internal drain hose, Level sensor fault

Safety: Unplug the appliance and allow it to cool.

Drain water: Use the pump filter to drain excess water from the drum.
Clean condenser and tray: Remove the condenser and clean it. Check the tray or sump beneath for lint and sludge; clean thoroughly.
Inspect internal hoses: Access the lower rear/side and check the small hoses from condenser tray to pump and to the drain. Straighten or replace if blocked.
Test condenser pump: Check for continuity and free impeller movement. Replace if faulty.

Hard 4/5

Condenser Pump

Check Price on Amazon

We may earn a commission from links on this page.