Hotpoint-Ariston
Drum Bearing Failure
Loud rumbling or grinding noise during spin, increasing over time.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear tub bearings, Failed bearing seal allowing water ingress, Bent or damaged drum spider, Overloading over long period
How to Fix / Troubleshooting
Safety: Unplug the appliance. Bearing replacement is a major repair.
- Confirm bearing noise:
- Spin the drum by hand with the machine off.
- Listen for grinding and feel for roughness or play.
- Check for drum play:
- Lift the drum up and down at the front; excessive movement indicates bearing wear.
- Short-term use: Continued use can damage the drum and tub; plan for repair or replacement soon.
- Repair:
- On many Hotpoint-Ariston combos, bearing replacement requires removing the entire tub and splitting it.
- Replace bearings, seal, and inspect/replace the drum spider if corroded.
- This is typically a job for an experienced technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Rear Drum Bearings and Seal Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements