Dryer cycle runs but clothes remain cold and wet; F14 displayed.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed dryer heater element, Open thermal fuse or thermostat, Loose heater wiring, Faulty dryer relay on PCB

Safety: Disconnect power and allow the unit to cool.

Access dryer heater: Remove the rear panel to locate the dryer heater housing.
Check continuity: Test the heater element and any inline thermostats/thermal fuses for continuity. Replace any open components with Hotpoint-specified parts.
Inspect wiring and connectors: Tighten loose spade terminals and replace any burnt connectors.
Control board: If the heater circuit is intact but never energizes, the dryer relay on the PCB may be faulty. Replace the main control board if confirmed.

Medium 3/5

Dryer Heater Assembly

Check Price on Amazon

We may earn a commission from links on this page.