H20 displayed; machine does not fill or fills very slowly.

Safety: Turn off the water supply and unplug the appliance.

• Check water supply: Ensure the tap feeding the washer-dryer is fully open and that other taps in the house have normal pressure.
• Clean inlet filters: Disconnect the inlet hose from the back of the machine. Remove and clean the small mesh filter inside the valve using a soft brush.
• Inspect hose: Check for kinks or internal blockages in the inlet hose. Replace if damaged.
• Test inlet valve: If water supply is good but the machine still does not fill, the inlet valve coil may be faulty. Measure coil resistance and replace the valve assembly if open circuit.