F10
Indesit
Pressure Switch Not Sensing Level
Washer-dryer does not detect correct water level; may not fill or may overfill; F10 displayed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Disconnected or damaged pressure switch hose, faulty pressure switch contacts, blocked air chamber, wiring fault to control board
How to Fix / Troubleshooting
Safety: Unplug and turn off water supply.
- Inspect pressure hose and chamber: Follow the steps in F04 to check for blockages, kinks, or splits in the hose and clean the air chamber on the tub.
- Check switch terminals: Ensure all spade connectors on the pressure switch are tight and corrosion-free.
- Functional test: With the hose attached, gently blow into the switch and listen for multiple clicks (different levels). If no clicks or intermittent, replace the pressure switch.
- Wiring continuity: Use a multimeter to check continuity from the switch to the main PCB. Repair any broken wires.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Level Pressure Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements