Indesit Unstable Power / Control Panel Connection Issue

Washer-dryer display or LEDs flicker or go blank intermittently during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose mains connection, failing mains filter, loose display ribbon cable, failing power supply on main PCB

Safety: Unplug before accessing internal parts.

Check plug and socket: Ensure the plug is fully inserted and the socket is not loose.
Inspect mains filter and wiring: Look for loose spade connectors or signs of overheating at the mains filter and main switch.
Reseat display cable: Remove the control fascia and reseat the ribbon cable between the display and main PCB.
PCB power supply: If flickering persists, the low-voltage power supply on the PCB may be failing; replace the board.

Medium 3/5

Mains Interference Filter / Main Control Board / Display Board

Check Price on Amazon

We may earn a commission from links on this page.