Indesit Excessive Vibration / Suspension Fault

Washer-dryer makes loud banging or knocking noises during spin; machine may move across the floor.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn shock absorbers (dampers), broken or stretched suspension springs, unbalanced load, transit bolts not removed, machine not level

Safety: Unplug before adjusting or accessing underneath.

Check installation: Ensure all transit bolts were removed after installation. Level the machine using the adjustable feet.
Load distribution: Avoid single heavy items; mix large and small garments.
Inspect dampers: Remove rear or front panel to access the shock absorbers. If they are oily, loose, or offer little resistance when moved by hand, replace both with Indesit-compatible dampers.
Check springs: Inspect top suspension springs for stretching or breakage. Replace if damaged.

Medium 3/5

Shock Absorbers (Dampers) / Suspension Springs

Check Price on Amazon

We may earn a commission from links on this page.