Indesit Spin Cycle Not Achieved

Washer-dryer will not spin or only performs slow turns; clothes come out very wet.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Unbalanced load detection, blocked drain pump or hose, worn motor brushes, faulty tachometer sensor, faulty control board spin logic

Safety: Unplug before internal checks.

Check load: Ensure the drum is not overloaded or with a single heavy item (e.g. rug). Redistribute laundry and try again.
Verify drainage: Confirm that water is fully pumped out. Clean the pump filter and hose as per F05.
Inspect motor and tachometer: Check brushes and tach coil as per F02.
Run a spin-only program: If the machine still refuses to spin with a balanced, small load and good drainage, further diagnosis of the control board may be required.

Medium 3/5

Drive Motor / Drain Pump

Check Price on Amazon

We may earn a commission from links on this page.