F26
Kenmore
Door Switch / Door Lock Error
Washer-dryer combo will not start or unlock; F26 appears on display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective door switch contacts, broken door lock mechanism, wiring harness issue, misaligned door
How to Fix / Troubleshooting
Safety first: Unplug the unit before working around the door lock.
- Check door closure: Ensure nothing is trapped in the door seal and that the door closes fully.
- Inspect door lock assembly: Remove the top panel and, if needed, the front panel or boot clamp to access the lock. Check for broken plastic parts or signs of overheating.
- Test switch contacts: Use a multimeter to verify that the lock's internal switches change state when the door is locked. If they do not, replace the door lock assembly.
- Check wiring: Inspect the harness from the lock to the control board for damage or loose connectors.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements