Washer-dryer leaks water from the front door area during wash.

Safety first: Unplug the appliance and turn off water supply before inspecting leaks.

• Step 1 – Inspect door seal: Open the door and carefully examine the rubber gasket all around, especially the bottom. Look for tears, holes, or deformation.
• Step 2 – Remove debris: Clean out coins, hairpins, or lint trapped in the folds of the seal. Wipe the seal and door glass with a damp cloth.
• Step 3 – Check retaining band: Ensure the outer metal or plastic band holding the seal to the front panel is tight. Refit or replace if loose.
• Step 4 – Detergent use: Use only HE (high-efficiency) detergent and correct doses. Over-sudsing can cause leaks from the door.
• Step 5 – Replace gasket: If damaged, remove the front and inner retaining bands, pull off the old seal, and fit a new Logik-compatible door gasket, aligning the drain holes at the bottom.