E15
Magic Chef
Power Supply / Voltage Error
Washer-dryer combo shows E15; unit may shut down unexpectedly or not power on reliably.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Unstable household voltage, Loose power cord connection, Faulty noise filter / line filter board, Defective main control board power supply section
How to Fix / Troubleshooting
Safety first: Unplug the unit and verify the outlet is properly grounded. Do not work on live circuits.
- 1. Check wall outlet: Plug in another appliance to confirm the outlet is supplying stable power. Avoid using extension cords or power strips.
- 2. Inspect power cord: Examine the Magic Chef power cord for cuts, burns, or loose prongs. Replace if damaged.
- 3. Access line filter / noise filter: Remove the rear or top panel to locate the line filter board where the power cord enters. Check for burned components or loose connectors.
- 4. Tighten connections: Ensure all spade terminals and harness plugs on the line filter and main board are fully seated.
- 5. If visible damage exists: Replace the line filter board or main control board as indicated. Due to shock risk, board-level repair should be done by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Line Filter Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements