Magic Chef Ground Fault / Overcurrent Condition

Washer-dryer combo trips the household circuit breaker or GFCI during use.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Shorted heater element, Damaged power cord, Water leak contacting electrical parts, Shorted motor windings

How to Fix / Troubleshooting

Safety first: Do not repeatedly reset a tripping breaker. Unplug the unit and leave it unplugged until the fault is found. Risk of fire or shock.

  • 1. Inspect for visible damage: Check the power cord, plug, and rear of the unit for burn marks or melted areas.
  • 2. Check for leaks: Look inside the cabinet for water around electrical components. Repair leaks before further testing.
  • 3. Test major loads: With the unit unplugged, disconnect the heater, motor, and pump one at a time and test each for continuity to ground with a multimeter. Replace any component that shows a short to chassis.
  • 4. If you are not comfortable with electrical testing: Contact a qualified appliance technician; this fault can be hazardous.
Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Wash Heater Element
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements