Washer-dryer combo will not power on at all; no lights or display, but outlet has power.

Safety first: Unplug the unit and verify the outlet is de-energized if you will be working near it. Internal components can expose you to mains voltage.

• 1. Confirm outlet power: Test the wall outlet with another appliance or a voltage tester. Avoid extension cords.
• 2. Inspect power cord externally: Look for cuts, burns, or crushed sections. Replace if damaged.
• 3. Access internal power connections: Remove the rear or top panel to locate where the power cord connects to the line filter or terminal block. Ensure all screws and connectors are tight.
• 4. Check internal fuse: On many Magic Chef combos, a small fuse is located on the main control board or line filter. Remove and test with a multimeter. Replace only with the exact same rating.
• 5. Inspect line filter board: Look for burned components or cracked solder joints. Replace the board if visibly damaged.
• 6. If still no power: The main control board may have failed and will likely need replacement by a qualified technician.