F34
Maytag Door Locking Error

Washer-dryer combo displays F34 and will not start; door may appear closed but not recognized.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Door lock not reaching locked position, mechanical interference at latch, faulty lock motor, misaligned door

How to Fix / Troubleshooting

Safety first: Unplug the unit before adjusting the door or lock.

Step-by-step checks:

  • 1. Check for obstructions: Inspect the door gasket and latch area for clothing or debris preventing full closure.
  • 2. Adjust door: Tighten hinge screws and adjust the door so it lines up squarely with the opening.
  • 3. Inspect lock mechanism: Access the door lock and check that the lock tongue moves freely when actuated. Replace the lock if it binds or fails to move.
  • 4. Test after replacement: Install a new lock assembly if needed and verify that the door locks and the error clears.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Door Lock Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements