Miele
Drum Bearing Failure
Loud rumbling or grinding noise during spin, even with balanced loads
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn rear drum bearings, Failed bearing seal allowing water ingress, Damaged drum shaft (spider), Corroded bearing housing
How to Fix / Troubleshooting
Safety first: Unplug the appliance. Spinning components can cause injury; never work on the machine while it is running.
- Check for play: With the door open, lift the drum up and down. Excessive movement or roughness indicates bearing wear.
- Spin by hand: Rotate the drum manually. A growling or grinding sound suggests bearing damage.
- Confirm source: Remove the drive belt and spin the motor separately. If the noise remains with the belt off, the bearings are at fault.
- Repair approach: On many Miele washer-dryers, bearing replacement involves removing the tub and may require replacing the entire tub assembly. This is a complex repair best handled by a professional.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Drum Bearing / Tub Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements