E18
NewAir
Dryer Airflow Restriction
Washer-dryer combo displays E18; drying performance is poor and cycle times may be extended.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged internal lint filter, Blocked condenser (for ventless models), Obstructed internal air ducts, Failing circulation fan motor
How to Fix / Troubleshooting
Safety first: Unplug the appliance before cleaning internal ducts or fans.
- Clean lint filter: Remove and thoroughly clean the lint filter before every drying cycle. Wash with warm water and dry completely if coated with fabric softener residue.
- Clean condenser (if applicable): For NewAir ventless combos with a condenser unit, open the condenser access panel and rinse the condenser fins under running water to remove lint and debris. Allow to dry before reinstalling.
- Inspect air ducts: Remove rear or lower panels to access internal ducts. Vacuum out lint buildup carefully.
- Check fan operation: During a test dry cycle (with panels reinstalled), listen for the circulation fan. If it does not run or is very noisy, the fan motor may be failing and should be replaced.
- Replace fan motor if needed: With power disconnected, remove the fan housing, disconnect wiring, and install a compatible NewAir dryer fan motor.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Dryer Circulation Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements