Washer-dryer combo leaves clothes very wet after drying; drying cycle completes but clothes are damp.

Safety first: Unplug the unit before cleaning internal components.

• Clean lint filter thoroughly: Remove lint and wash the filter with warm water if coated. Dry completely before reinstalling.
• Clean condenser (ventless models): Remove the condenser unit and rinse under running water to clear lint. Allow to dry fully.
• Do not overload: Dry smaller loads and remove some items if the drum is tightly packed.
• Check moisture sensor strips: Locate the metal sensor strips inside the drum (usually near the door). Clean them with a soft cloth and mild detergent to remove residue that can affect sensing.
• If still poor: The heater or circulation fan may be weak and should be tested and replaced if necessary.