Proline No Power / Dead Appliance

Washer-dryer combo will not power on at all; no lights or display, no response to buttons.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown mains fuse in plug, Faulty power cord, Failed mains interference filter, Defective main control board power supply section

How to Fix / Troubleshooting

Safety first: Ensure the socket is switched off before removing the plug. Do not work on live circuits.

Step-by-step checks:

  • Check wall outlet: Test the socket with another appliance to confirm it has power.
  • Inspect plug fuse (UK/IE): If your Proline uses a fused plug, open the plug and test or replace the fuse with the correct rating.
  • Examine power cord: Look for cuts, kinks, or burn marks. Replace the cord if damaged.
  • Check mains filter: Remove the top or rear panel to access the mains filter. Inspect for swelling, cracking, or burning. Replace if faulty.
  • Control board: If power reaches the PCB but there is no display or response, the board's low-voltage power supply may have failed and the PCB will need replacement.

When to call a technician: If you are not comfortable testing live voltage or replacing the PCB, contact a professional.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Mains Interference Filter
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements