RCA
No Power / Dead Appliance
Washer-dryer combo will not power on at all; no lights or display, unit appears dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped household breaker or blown fuse, Faulty power cord, Failed line filter or noise filter board, Defective main control board power supply section
How to Fix / Troubleshooting
Safety first: Do not open live electrical panels. Unplug the unit before internal inspection.
- Check household power: Verify the circuit breaker is not tripped and the outlet has correct voltage using another appliance or a tester.
- Inspect power cord: Look for visible damage, burns, or loose plug blades. Replace if damaged.
- Test outlet: Plug the washer-dryer into a different known-good outlet (if cord length and safety allow).
- Internal checks (advanced): With the unit unplugged, remove the rear or top panel and inspect the line filter board where the cord enters. Look for burnt components or loose connections.
- When to replace parts: Replace a damaged power cord or line filter board. If power reaches the main control board but there is still no display, the main control board likely needs replacement by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements