E12
Roborock
Dryer Fan / Blower Motor Fault
Washer-dryer combo displays E12 and will not start drying; fan may not run
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed Roborock dryer fan motor, Obstructed blower wheel, Loose fan motor wiring, Faulty dryer fan driver on control board
How to Fix / Troubleshooting
Safety first: Disconnect power and wait for internal parts to cool before accessing the dryer section.
- Listen for fan: Start a drying cycle and listen for the fan motor. If silent, proceed with inspection.
- Access fan housing: Remove the rear panel or top cover (model-dependent) to reach the Roborock dryer fan assembly.
- Check for obstructions: Inspect the blower wheel for lint buildup, fabric pieces, or foreign objects. Clear any debris.
- Inspect wiring: Ensure the fan motor connector is secure and wires are not damaged.
- Test motor: With a multimeter, check continuity of the fan motor windings. Replace the Roborock dryer fan motor if open or seized.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Roborock Dryer Fan Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements