Washer-dryer combo displays CE and may stop during operation, sometimes with a burning smell.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Immediately unplug the unit if you smell burning or see smoke. Do not continue to run the machine.
Steps to check:
- Remove excess load: Open the door and remove some items to reduce weight. Check that the drum turns freely by hand.
- Check for obstructions: Spin the drum by hand and listen for scraping. Foreign objects like bra wires may be lodged between the inner drum and outer tub.
- Inspect motor area: Remove the rear panel and visually inspect the motor and wiring for burn marks or loose connectors.
- Test a small load: After corrections, run a short cycle with a small load to see if CE returns.
When to stop: If CE persists or the motor shows signs of damage, the drive motor or PCB may need replacement. This is a complex, high-current repair and should be handled by a technician.