Water intake timeout; machine stops early in cycle with E17

Safety first: Unplug the appliance and close the water tap before hose work.

Step-by-step checks:

• 1. Confirm water supply:
  • Open the tap fully.
  • Check household water pressure; if low, consult a plumber.
• 2. Clean inlet filters:
  • Remove the inlet hose and clean mesh filters at both ends.
• 3. Test inlet valve:
  • Access the valve and measure coil resistance.
  • If out of spec or intermittent, replace the valve assembly.

When to call a technician: If E17 persists with good pressure and a new valve, control or sensor issues may need professional diagnosis.