E25
Siemens
Condensate Pump Failure
Dryer pump or condensate pump fault; E25 displayed, water may remain in condenser area
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked condensate pump, Failed condensate pump motor, Blocked condensate hose, Float switch stuck
How to Fix / Troubleshooting
Safety first: Unplug the appliance. Expect water in the base or condenser area.
Step-by-step checks:
- 1. Access condensate pump:
- Remove lower front or side panel to locate the small pump used for drying condensate.
- 2. Clear blockages:
- Check the small hoses to and from the pump for lint or scale.
- Clean the pump chamber and ensure the float (if present) moves freely.
- 3. Test pump motor:
- Measure coil resistance; if open or seized, replace the condensate pump.
When to call a technician: If access is difficult or if control issues are suspected, professional service is recommended.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condensate Pump
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements