Speed Queen
Worn Drum Support Components
Dryer makes squealing or screeching noise
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn drum rollers, Dry or failing idler pulley, Drum glides worn through, Belt rubbing on damaged pulley
How to Fix / Troubleshooting
Safety first: Unplug the unit before removing the front or rear panels.
- 1. Access drum supports: Remove the front panel and drum (if required) to access rollers, idler, and glides.
- 2. Inspect rollers: Spin each roller by hand. Replace any that are noisy, flat-spotted, or seized.
- 3. Check idler pulley: Ensure the idler spins freely and is not wobbling. Replace if worn.
- 4. Inspect drum glides: Replace worn or missing glides on the front bulkhead.
- 5. Replace belt if worn: Install a new belt if it shows cracks or glazing.
- 6. Reassemble and test: Run the dryer to confirm the squeal is gone.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drum Rollers / Idler Pulley / Drum Glides
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements