Washer-dryer combo vibrates excessively and walks across the floor during spin.

Safety first: Stop the cycle and unplug the unit before adjusting installation.

• Check shipping bolts: For recently installed units, verify that all rear shipping bolts and transit brackets have been removed according to the installation manual.
• Level the machine: Adjust all four leveling feet until the unit is stable and does not rock.
• Stabilize floor: If installed on a weak or suspended floor, consider adding a plywood reinforcement or anti-vibration pads under the feet.
• Inspect suspension: If vibration persists, have the shock absorbers and suspension springs inspected and replaced if worn.