E20
Teka
Condenser Pump / Drying Water Pump Error (on condenser-type combos)
Washer-dryer shows E20; may not start drying or may stop with wet clothes.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked condenser water pump, Clogged condenser sump, Faulty condenser pump motor, Wiring issue to condenser pump
How to Fix / Troubleshooting
Safety first: Unplug the appliance and allow it to cool.
- Clean condenser area: Remove the lower front panel and pull out the condenser (if removable). Clean thoroughly and check the sump area for lint and sludge.
- Check condenser pump: Locate the small pump that moves water from the condenser sump to the drain. Inspect for obstructions and ensure the impeller turns freely.
- Test pump: With power disconnected, measure resistance across the pump terminals. Replace if open circuit or seized.
Warning: If you are unsure whether your Teka model uses a separate condenser pump, consult the user manual or a technician before disassembly.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condenser Pump
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements