Teka
No Power / Dead Appliance
Washer-dryer combo will not power on at all; no lights or display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse or tripped breaker, Faulty power cord, Failed mains filter (EMI filter), Defective main control board power supply
How to Fix / Troubleshooting
Safety first: Before opening the appliance, unplug it. Do not work on live circuits.
- Check household supply: Verify that the wall socket works by plugging in another device. Reset any tripped breakers or replace blown fuses as needed.
- Inspect power cord: Look for cuts, burns, or kinks. If damaged, the cord must be replaced by a qualified technician.
- Try a different socket: Plug the Teka combo directly into another known-good outlet without an extension lead.
- Internal checks (advanced): Remove the top/rear panel to access the EMI filter and main PCB. Check for obvious burn marks or swollen components. If present, the EMI filter or PCB will need replacement.
Warning: Internal power supply diagnostics involve lethal voltages. If external checks do not restore power, contact a professional.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements