F26
Whirlpool Door Switch or Door Lock Error

Washer-dryer combo displays F26 and may not lock the door or start a cycle.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Defective door lock switch, misaligned door, broken door strike, wiring issue between lock and control

How to Fix / Troubleshooting

Safety first: Unplug the appliance before working on the door area.

Step-by-step checks:

  • Visual inspection: Check the door strike and latch for damage or wear. Ensure the door closes firmly.
  • Access door lock: Remove the front panel or door boot clamp to reach the lock. Inspect for cracks or burnt areas.
  • Test switch: Use a meter to verify the door switch contacts change state when the door is closed and locked.

When to replace: Replace the door lock assembly or strike if faulty. If the lock is good and wiring is intact, the main control board may be misinterpreting the door status.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Door Lock Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements