Washer-dryer shows E70; temperature readings appear incorrect, cycles may be too hot or too cold.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open or shorted NTC sensor, Loose sensor connector, Damaged sensor wiring, Wrong type of sensor fitted

Safety: Disconnect power and allow the appliance to cool.

Identify sensor: Determine whether the error relates to wash or dryer NTC (refer to service documentation if available).
Measure resistance: At room temperature, measure the NTC resistance. Replace if it reads near 0 Ω (short) or infinite (open).
Check connectors: Reseat the sensor plug and inspect for corrosion.

Medium 3/5

NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.