Zanussi
Drive Motor / Belt Failure
Washer-dryer drum does not turn at all during wash or spin, but the machine fills and drains normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken or slipped drive belt, Worn motor carbon brushes, Faulty motor, Loose motor connector
How to Fix / Troubleshooting
Safety: Unplug the appliance.
- Check belt: Remove the rear panel and inspect the drive belt between motor and drum pulley. Refit if slipped off; replace if broken or heavily worn.
- Inspect motor brushes: On brush-type motors, remove and check the carbon brushes. Replace if short or unevenly worn.
- Check wiring: Ensure the motor connector is firmly seated and wires are intact.
- Test motor: If the belt and brushes are good but the motor does not run, the motor may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements