E61
Amica Heating Performance Fault

Washer shows E61 and does not reach set temperature; long cycles on Amica washing machine.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Partially failing heating element, Scaled heater reducing efficiency, Incorrect NTC readings, Low supply voltage

How to Fix / Troubleshooting

Safety first: Unplug the washer and allow it to cool.

  • 1. Check heater for scaling: Remove the heater and inspect for heavy limescale buildup. Descale or replace the heater if heavily coated.
  • 2. Measure heater resistance: Confirm it matches Amica specifications. A significantly higher resistance than normal can reduce heating power.
  • 3. Verify NTC accuracy: Compare NTC readings to a temperature-resistance chart. Replace if out of tolerance.
  • 4. Electrical supply: Ensure the washer is on a dedicated circuit with proper voltage. Persistent E61 with good components may indicate PCB control issues.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Heating Element
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements