Amica Drum Bearing or Pulley Fault

Washer produces high-pitched squealing or grinding noise when spinning on Amica washing machine.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn drum bearings, Damaged drum pulley, Loose drive belt rubbing, Foreign object in tub seal

How to Fix / Troubleshooting

Safety first: Unplug the washer before inspection.

  • 1. Spin drum by hand: Listen for grinding or rumbling. Excess noise suggests bearing wear.
  • 2. Inspect belt and pulley: Remove rear panel and check that the belt is correctly aligned and not rubbing on the cabinet. Inspect the drum pulley for cracks or looseness; tighten or replace if needed.
  • 3. Check for play: Try lifting the drum up and down at the door opening. Excessive movement indicates bearing failure.
  • 4. Bearing replacement: Replacing bearings usually requires tub disassembly or replacement and is best done by an experienced technician.
Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Drum Bearing Kit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements