Amica
No Power / Supply Fault
Washer will not power on at all; no lights or display on Amica washing machine.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown mains fuse, Faulty power cord, Defective mains filter (EMI filter), Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Ensure the wall socket is switched off before checking plugs or fuses. Do not work on live circuits.
- 1. Check outlet and fuse: Test the wall socket with another appliance. Check the plug fuse (if applicable) and replace with the correct rating if blown.
- 2. Inspect power cord: Look for cuts, burns, or kinks. Replace the cord if damaged.
- 3. Check mains filter: Unplug the washer, remove the rear or top panel, and locate the mains filter where the cord enters. Inspect for burn marks or bulging. Replace if faulty.
- 4. PCB power supply: If the filter and cord are good but the machine remains dead, the internal power supply on the main PCB may have failed. Board replacement is usually required and should be done by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Mains Filter / Interference Suppressor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements