Asko
No Power / Dead Machine
Washer will not power on at all; no lights or display
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown household fuse or tripped breaker, Faulty Asko power cord, Defective mains filter / interference suppressor, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Ensure your hands are dry. Do not open live electrical panels.
- Step 1 – Check outlet: Plug a lamp or tester into the same outlet to confirm power is present.
- Step 2 – Check breaker/fuse: Reset the circuit breaker or replace the fuse if tripped. If it trips again immediately, stop and call an electrician.
- Step 3 – Inspect power cord: Unplug the washer and inspect the Asko power cord for cuts, burns, or kinks. Replace if damaged.
- Step 4 – Internal power module: Remove the top panel and locate the mains filter and main PCB. Check for burnt smell or visible damage. If the board or filter is burnt, replacement is required.
Because this involves mains voltage, internal electrical diagnosis beyond visual inspection should be done by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Mains Filter / Interference Suppressor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements