Bauknecht Internal hose or component leak

Washer leaks water from underneath the machine

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Cracked tub-to-pump hose, loose hose clamp, leaking drain pump, leaking inlet valve or dispenser hose, cracked outer tub

Safety first: Unplug the washer and turn off water supply.

Access underside: Remove rear and lower front panels. Place towels under the machine.
Run a short fill test: Briefly power the washer and start a fill cycle while observing hoses and components. Stop and unplug as soon as you locate a leak.
Tighten or replace: Tighten loose clamps, replace cracked hoses, and replace a leaking pump or valve.

If the outer tub is cracked: The tub assembly usually must be replaced, which is a major repair.

Hard 4/5

Tub-to-Pump Hose or Drain Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.