Washer displays E16; often related to water inlet or valve configuration issues on some Beko models.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty secondary inlet valve coil, Incorrectly connected inlet hoses, Wiring fault to secondary valve, Blocked secondary inlet filter

Safety first: Unplug the washer and close water taps.

Step-by-step checks:

Verify hose connections: Ensure hoses are connected to the correct inlets as per the user manual (where hot/cold are separate).
Clean filters: Remove hoses and clean mesh filters on all valve inlets.
Test secondary coil: With the rear panel removed, identify the secondary valve coil and measure its resistance. Replace the valve assembly if the coil is open or shorted.

If the valve is good but E16 persists, the PCB output to that valve may be faulty.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.